Skip to content
  • There are no suggestions because the search field is empty.

Autonomo - Installation via Command line (quiet)

Instructions for running a command line installation of Autonomo

Prerequisites

You must have admin rights to install, repair or uninstall the Autonomo application.

Autonomo requires a minimum of 400 mb of available disk space.


The asset Autonomo is being installed on MUST have a Wi-Fi adapter and it must be enabled.  

During installation, Wi-Fi or Ethernet MUST be connected so that the Asset created on the Troverlo platform can be auto-provisioned.


There are three ways you can install Autonomo:

  1. Autonomo - Installation via UI
  2. Autonomo - Command line (quiet) installation options - this page
  3. Autonomo - Intune setup info

Download the latest version

  1. Download Autonomo
    1. This same link can be accessed by selecting the last option on the Navigation panel of the Portal.

Quiet install/upgrade of Autonomo

Run this command in an admin command prompt window where the .msi file is located:

Msiexec.exe /i TroverloAutonomoV<x.y.z>.msi /qn /norestart /l autonomo-install.log USERNAME=“<usernameValue>" PASSWORD=“<passwordValue>" CATEGORY=“""<categoryValue>""" SUBCATEGORY=“""<subCategoryValue>""" ASSETGROUP="""<group1,group2,group3>“"" GUESTNETWORK="yes"


Notes:

  • Replace the "<x.y.z>" with the appropriate version, such as 3.0.12
  • Replace the additional text surrounded by "<>" with your data
  • CATEGORY, SUBCATEGORY and ASSETGROUP are wrapped in triple-double quotation marks to handle spaces and special characters
  • ASSETGROUP must be separated with a comma, no spaces; this is optional
  • GUESTNETWORK this is optional, if this is used, the SSID will say "Guest Network" instead of "Troverlo" - this is a new feature of the 3.x release

References:

  1. Autonomo - Asset Category and Asset Sub-Category options
  2. Autonomo - Asset Groups

 

Quiet repair install of Autonomo

Run this command in an admin command prompt window where the .msi file is located:

Msiexec.exe /i TroverloAutonomoV<x.y.z>.msi  /qn /norestart /l autonomo-install.log

 

Quiet uninstall of Autonomo

Run this command in an admin command prompt window where the .msi files is located:

Msiexec.exe /x TroverloAutonomoV<x.y.z>.msi /qn /norestart /l autonomo-install.log

With the 3.x release, this is the ONLY way Autonomo can be uninstalled and all files, folders and logs will be removed from the Asset.

Uninstalling Autonomo now requires internet connectivity, valid user credentials and admin rights to the asset.

 

Autonomo-install.log

This file can be found in the same directly that the .msi file is located.

This is a log file that provides information output from the MSI file when quiet install is used (command line).

Use it to validate

  • Autonomo version, date and time installed.
  • All the parameters entered on the command line

Use it to troubleshoot

  • It will show all the steps covered
  • It will show success or any errors if not successful